| INDUSTRIAL |
|
|
 |
|
BELT
BUSHING |
Application Sector: Industrial
Moulded part: Belt bushing
Material: LATIOHM 66-06 PD03 G/20
Project requirements:
• Compliance to the Atex standards:
conductivity < = 10E9;
• Excellent load resistance;
• Excellent self-lubricating properties
and wear resistance;
• Excellent mechanical properties.
The LATIOHM 66-06 PD03 G/20 part has replaced
the bushing, which was previously made in
Polyamide with glass fibre, but it was not
compliant to the Atex standards. |
|
SPECIAL
KNIFE FOR TEXTILE WEAVER MACHINE |
Application Sector: Textile
Moulded part: Special knife for textile
weaver machine
Material: LARTON G/40
Project requirements:
• High mechanical properties;
• High stiffness;
• Excellent dimensional stability;
• Very tight tolerances;
• Thermal resistance at 120°C;
• Excellent chemical resistance to
the agents used in the
textile sector;
• Low coefficient of linear thermal
expansion.
The part in Larton G/40 has substituted
the existing component in special chromium
plated steel. |
|
HOUSING
FOR A HART CONFIGURATOR |
Application Sector: Industrial
processes
Moulded part: Housing for a hart
configurator
Material: LATIOHM 62-09 PD01 G/20-V2HF
GREY
Project requirements:
• Electrical conductivity lower
than 1 giga OHM;
• UL94-V2 rating;
• Excellent mechanical properties;
• High stiffness and impact resistance;
• Excellent chemical resistance to
oil derivates;
• High strength for self-tapping screws;
• Light grey color. |
|
HYDRAULIC
PUMP LID |
Application Sector: Industrial
Moulded part: Hydraulic pump lid
Material: LARAMID G/15 NAT
Project requirements:
• Excellent mechanical properties;
• Excellent chemical and thermal resistance
as the lid is in contact
with hot hydraulic oil at temperatures of
110-120°C. This performance
must be guaranteed
for many years;
• Excellent dimensional stability and
very tight tolerances;
• Very low moisture absorption. |
|
RADIO-AXIAL
ROLLER BEARING AND THRUST BEARING |
Application Sector: Mechanical
Moulded part: Radio-axial roller
bearing and thrust bearing
Material: LATILUB 66-01M G/30
Project requirements:
• Elevated rigidity;
• Self-lubricating;
• Very tight tolerances;
• Good dimensional stability;
• Excellent resistance to lubricating
oils and greases. |
|
PAPER
SLOT FOR PHOTOS DEVELOPING DEVICE |
Application Sector: Mechanics
Moulded part: Paper Slot for photos
developing device
Material: LATILUB 87/28 - 20T
Project requirements:
• Self lubrificating (as little
friction as possible on the photo);
• Excellent dimensional stability;
• Tight tolerances.
The component in Latilub 87/28-20T, has
substituted the metal |
|
CABLE
CLAMP FOR TEXTILE MACHINE |
Application Sector: Textile
Moulded part: Cable Clamp for textile
machine
Material: LATAMID 66 H2 K/40
Project requirements:
• Very high stiffness;
• Self-lubricating;
• Low coefficient of friction;
• Tight tolerances;
• Good chemical resistance to the agents
used in the textile industry;
• Very low electrical resistivity. |
|
BRUSHLESS
MOTOR-SHIELD FOR YARN WINDING MACHINE |
Application Sector: Textile
Moulded part: Brushless motor-shield
for yarn winding machine
Material: LATIOHM 66-06 PD03 G/20
BLACK
Project requirements:
• High electrical conductivity;
• Excellent mechanical properties;
• Excellent resistance to the chemicals
used in the textile industry;
• Good surface finish and excellent
dimensional stability. |
|
TOOL-HOLDER
BARS |
Application Sector: Industrial
Moulded part: Tool-holder bars
Material: LATILUB 87/28 - 12T G/20
Project requirements:
• Low coefficient of friction and
wear;
• High rigidity;
• Excellent dimensional stability and
very tight tolerances;
• Good chemical resistance for printed
circuits process;
• Excellent colourability. |
|
PINION
TUBE |
Application Sector: Textile
Moulded part: Pinion tube
Material: LATILUB 73/13 - 01M
Project requirements:
• Excellent wear resistance;
• Self-lubricating in absence of oils
and grease;
• Low coefficient of friction;
• Good mechanical properties;
• Tight tolerances;
• Good fatigue resistance;
• Excellent chemical resistance in
contact with
chemicals used in
textile sector. |
|
FLOW
VALVE FOR AN INDUSTRIAL PAINTING DEVICE |
Application Sector: Industrial
Moulded part: Flow valve for an industrial
painting device
Material: LARTON GCE/600
Project requirements:
• Excellent chemical resistance
to paints and solvents;
• Very good thermal resistance;
• Very high dimensional stability even
at high temperatures;
• Total absence of hygroscopicity. |
|
PAPER
EJECTOR-SHAFT FOR SCANNER/PRINTER |
|
Application Sector: Business
Machine
Moulded part: Paper ejector-shaft
for scanner/printer
Material: LATILUB 87/24UV-20T
Project requirements:
• Excellent self lubrication;
• Excellent dimensional stability;
• Very tight tolerances;
• Excellent mechanical properties;
• Self-extinguishing: UL94-V2 Recognised.
The shaft is then overmoulded with a thermoplastic
elastomer.
|
| Contact: |
email:
marketing@it.lati.com
LATI Industria Termoplastici S.p.A.
Via F. Baracca, 7 21040
Vedano Olona (VA) - Italia
Tel. : +390332409111 - Fax: +390332409307
|
|
|
|
|
|
|
|
|
|
Copyright
© 2007 - LATI Industria Termoplastici S.p.A.
- Via F. Baracca, 7 - I - 21040 VEDANO OLONA (VA)
Tel.
+39-0332-409111 - Fax +39-0332-409307 - E-mail: info@lati.com
- P.IVA IT00214880122
|
|